精细胎面再生胶 FINE RECLAIMED RUBBER
1.概述 INTRODUCTION
    精细胎面再生胶是选用载重汽车、工程汽车外胎地胎冠原料制成地。该产品性能优异，各项性能均超过同行业水平，产品外观为黑色均匀块状物、无异物、无颗粒、无异味、手感细腻、光滑，深受外资企业地青睐。该产品已远销台湾及东南亚等地。

    The fine reclaimed rubber is made by tire crown of trucks. The performance of this product is beyond the level in this field.Its appearance is black blocky piece without impurit、granular and it is odorless and touched smoothly. The product was exported to many countries in southeast asia and earned good reputation among customers.

2.规格 SPECIFICATION
    胶粉目数：60目以上 Partical size of rubber powder:above 60

    成品为长方体黑色块状物，每块20公斤，定型冷却后，每块66x35x10（厘米），精炼出片厚度不超过0.3毫米。
    The finished product is cuboid block.Each piece is 20 kgs.After cooling,the appearance is fixed to 66x35x10(cm).While refining,the thickness of the rubber piece is no more than 0.3mm.

    包装：塑料薄膜袋。
    Packing: poly bags

3.主要性能指标 PERFORMANCE SPECIFICATION

项目 Item 单位 Unit 结果 Index 检查方法 Examine Method 外观 Appearance 无异物 No Impurit 目视 Eye Observation 水分 Water Content % ≤1.20 GB/T13460-03 灰分 Ash % ≤15.0 GB/T13460-92 丙酮抽提物 Acetone Etract % ≤20.0 GB/T13460-03 扯断强度 Tensilestrength Mpa ≥8.5 GB/T13460-03 扯断伸长率 Elongation % % ≥330 GB/T13460-03 门尼粘度ML1+4 Mooney ML100℃1+4 40-70 GB/T1232